How to redo stairs

How to remodel stairs from carpet to wood? As soon as we knew we had nice wood under the carpet we ripped the carpet and padding up and began our journey to re-doing our stairs ! Carpet rips up quite easily! And the pad came up quickly as well. The stair redo how-to I know it took me forever to get this post up, but I’m finally going to share the rest of the steps it took to get the stairs to where they are now – that would be GORG. This process took a while, but the planning before that took a good year – I took my time deciding what to do.

Whether you are looking for step-by-step instructions on how to refinish carpeted stairs , how to remodel stairs on a budget, or how to retread basement stairs yourself, you have come to the right place! The most important part of how to refinish stairs that were carpeted is as always cleaning the stairs thoroughly before applying any product. To me, the most important little tool is the tack cloth because even after vacuuming and cleaning the stairs I still got a huge amount of lint on the cloth. Then use a good heavy duty primer.

You might also want to add a polyurethane. I have worked on hundreds of homes and almost all have plywood treads on the stairs. I would not use Jasco again.

Simply sand until you have a good smooth, clean surface then spray another coat of primer. If some of the original paint is still on there and adheres well you only need to sand it so that the edge of the paint. Instructions Remove the carpet from the stairs.

Using a varnish stripper, remove the top coat from the stair treads. Fill in any holes in the wood with wood filler. Two main carpet ideas to choose frofull carpeting or stair runners. Full carpeting – covers every inch of the stairway floor. It comes in handy if the stair flooring is not too appealing.

Free 2-day Shipping On Millions of Items. A quick solution to give your stairs a facelift is to paint the stair treads and kicks. Paint each tread with a color separate from the kicks to make the treads stand out.

If you prefer to give. Fortunately, they’re simple to install with these basic step-by-step instructions. Sand the wood using multiple grit sandpaper. Paint the stair risers.

Remove any trim work where the risers and treads meet. Rebuild any broken stairs or landings. Stain the wood treads. Vacuum in between sandings. Take a block sander.

Bauen - DIY Home Improvement 249views. Start by sanding down the treads to bare wood with the grit sandpaper. This will require a combination of. This step will ensure that dust and. To take up all the carpet tack strips, just place a flat head screw driver under the strip—tap in with the hammer and gently pry it up.

Pull up all the carpet pad…. Keep moving the screwdriver until the tack strip comes up. Do this same technique with all the 569million staples….

There was no skirting on the stairs , so we had to work with each stair individually to fit it tight to the wall. The facings were painted white before installation, using some leftover enamel from another project.