Sloped joist hanger

The LSU series of hangers may be sloped and skewed in the fiel offering a versatile solution for attaching joists and rafters. These hangers may be sloped up or down and skewed left or right, up to 45°. Shop joist hangers and a variety of hardware products online at Lowes.

When factoring in load requirements, member size and costs, deciding on the best solution can be a daunting process. The LSU and LSSU series of hangers may be sloped and skewed in the fiel offering a versatile solution for attaching joists and rafters. These are the most common solid sawn joist hangers used.

This product is preferable to similar connectors because of easier installation, higher loads, and lower installed cost. Fasteners: Nail dimensions in the table are listed diameter by length. The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters , the LRUZ’s unique design enables the hanger to be installed either before or after the rafter is in place.

The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. Slope angle can be adjusted on-site. Adjustable between and degree, up and down.

The LS hanger slopes from degrees to degrees down (to 7:pitch down). It is constructed of 18-gauge steel with a Ggalvanizing finish. That’s where our skewed joist, sloped and mini hangers come in, giving you the construction freedom to escape the traditional right angle.

Some of our timber solutions are available with a set slope of 45°. Others are adjustable, enabling you to achieve custom angles as required. Technical data sheet.

For double shear single hangers (Photo 4), fasten the hanger to the joist (s) with longer 8d or 10d nails. Position LSSH connector against plumb-cut end of joist. The hangers are designed for use on commercial properties and schools that require additional safety factors.

This new design allows the hanger to be installed after the sloped joist or rafter is already in place. The bendable side flange design allows for easy skew adjustment for angles of 0° to 45° from perpendicular. SINGLE JOIST HANGERS DESIGN FEATURES: TAMLYN custom-die designed and manufactured for quick installation and maximum load value. Available in G-1Triple Zinc or Hot-Dip Galvanized. Call for availability.

Angled joist hangers should be available at your local lumberyard for 2xand 2x10. Double right- and left-skewed joist hangers are also available for angled beams, but they are relatively expensive. Load ratings are specific to how the joist will be used after the hanger is installed. Choosing between Labels. If you will be using a joist hanger for roofing, select one that is rated for sloped applications.

Manufacturer Part Number LSSU210. The lower heel of the joist hanger must be bent only once along the desired angle α. The height of joist is dependet on the slope. A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.

Buy online at LOW TRADE PRICES plus FREE next day DELIVERY available. Face mount, top flange, skewe sloped or sloped and skewed. Find your joist type in this guide.

Confirm that your joist load is less than the hanger allowable load. Select a hanger from the table. Visit us today for the widest range of Timber Connectors products.