How to remove popcorn texture from ceiling

How to retexture a popcorn ceiling? Try it dry first, then dampen the texture with water and try again. Some texture comes off easily without water, but in most cases wetting is best.

Remove furniture from the space, or move it to the center of the space and cover with plastic sheeting. Fill a spray bottle with warm water, then spray one small section (square feet) of ceiling at a time. Slowly remove the popcorn coating.

The absolute easiest way to remove popcorn ceiling is to spray water on small square sections of the ceiling , one at a time, and allow the water to soak into the ceiling. After enough time has elapse position the ladder under the moistened section, put on your dust mask and protective goggles , then climb up. Holding a putty knife at a 30-degree angle to the. Best to use a scraper.

I sujest you get a 12. First, a word of caution. OK if it stays up, could be a problem as you take it down. If anything is going to work, the misting with water followed by. I did a remodel of my bathroom a couple of years ago, and I removed the popcorn ceiling myself.

It is really easy to do. Let me tell you how I did it, and then you can decide if you want to hire someone to help: I went to. When I redid my husbands office last year, I wanted to remove texture from the ceiling.

The original idea was to hide the imperfections of the ceiling , which makes sense. Popcorn ceilings make rooms look so dated! However, all the little bumps and ridges from the texture create shadows that make the ceiling seem lower and darker.

For asbestos-free texture only. Scrape texture from surface. Dispose of scrapings. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. Free 2-day Shipping On Millions of Items.

Fill the sprayer with warm water and pump it to raise the pressure. Lightly spray a four-foot square test area of the ceiling and let it sit. If your ceiling only has textured product but no paint, it should readily absorb the water and be ready for scraping in about minutes.

Keep in mind that scraping the popcorn texture off your ceiling may be simple enough, but repairing the drywall beneath is a significant undertaking. Consider enlisting the help of a professional to thoroughly smooth out and repair the ceiling before painting or applying a new texture. So, to remove popcorn ceilings, you need to get them wet. The more soaked they are, the easier they come down. Also, this is going to get messy, like really messy, so cover up what you don’t want to have to throughly clean later.

Let it soak in for a minute, and then spray it again. The popcorn material is very dry and porous, so it will easily soak in the water you spray on it. It attracts dust and creates shadows. Whenever you take it off, it makes a room feel much more vibrant. Deciding to remove a popcorn ceiling is tricky, however, because of the possibility of asbestos.

If you’ve removed the texture yourself, no doubt you’ve realized that the ceilings are too rough and uneven to be paint-ready. What about asbestos concerns? If there are only one or two coats of paint, the broom should be able to make large enough scratch marks to allow water to penetrate into the.