Product description. Many plaster walls have lead paint or asbestos issues and need to be recoated rather than removed). Plaster washers are about the size of a quarter and cost pennies.
A drywall screw goes through the washer and is driven into the wood lath behind the plaster. The unique design of the plaster washers anchors the plaster firmly against the lath, stopping cracks and sagging. Use to hold sagging ceilings. Countersunk washer made of steel. Drilled holws, shot adhesive and used washers to screw back to plaster.
Very easy and effective. I would note use escape holes for every washer , one on each side. Worked better when sat for days before removing. Perforations give tooth to a covering plaster coat.
Instructions included. Its a good short term fix. How to fix damaged plaster? What is a plaster washer? First, locate the joists or studs and mark their location in the loose area.
Push up the loose plaster and place 2-in. The convex washer will flatten as the screw tightens. Start by drilling small pilot holes at least away from each side of the crack. Then fasten the washers with screws.
A plaster washer is a thin metal disk that increases the size of the head of a drywall screw so that it doesn’t pull through the plaster. You thread the drywall screw through a plaster washer and then drive it through the plaster and into the ceiling joists, wall studs, or wood lath. These specially shaped and perforated steel washers restore strength to damaged plaster. Repair Loose Plaster.
A steel screw is driven through the center of the washer and down through the plaster into the lath below. As the screw is tightene the washer draws the plaster back into firm contact with the lath and anchors it from further movement. Packaging: package of washers. If there is evidence that the lath is not securely fastened to the framing, use longer drywall screws in combination with the plaster washer and drive the screws through the plaster and lath and into the framing.
Also, can be used to attach exterior gypsum sheathing for high wind-load areas. They are small perforated metal buttons and are sunk in the middle as they are specifically designed for drywall screws. The perforations are designed to hold compound or spackle and easily hide repairs. Versatile Grip-Plate washer can be used with various different fasteners, including nails or screws.
It can be used for many applications including attaching lath for stucco or stone veneer, re-securing sagging plaster , and gypsum board attachment. Washer has a slight dome shape, which flattens out when tightened down. To repair large sags, follow these steps: Remove the loose plaster. The washers secure and stabilize the plaster on walls and.
From a piece of scrap drywall, cut a patch that completely covers the hole in the wall. Save yourself time and trouble —. Place the patch over the.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.