How to redo stairs from carpet to wood

How to renovate stairs to hardwood? How do you remove carpet from stairs? Remove the carpet from the stairs. Using a varnish stripper, remove the top coat from the stair treads. Fill in any holes in the wood with wood filler.

Sand the wood using multiple grit sandpaper. They are called Retro Treads and mine were unstained red oak from Lowes. Check out my step-by-step tutorial so that you can redo your own stairs with minimal work and maximum effect! The stairs need to be sanded down from top to bottom and this means lots and lots of dust so you need a good.

To make it a lot less noticable you may have to stain it even though you don t want to. Try looking at light colored stains. Firstly, use a hot air gun to remove the paint - tedious but effective. Then sand down all the stairs, brush and wipe well and apply varnish of your choosing colourwise. Then apply a couple of coats of boat varnish!

Hell of a job to tackle,. Easy to follow video instruction tutorial. And it was quite the project.

Interior stairs can be covered by several types of material, such as carpet , wood , tile or natural stone and sheet vinyl. If your stairs are covered in carpet. Okay so this budget stair remodel is seemingly the project that never ended… It was one of the first things we demo-ed and one of the last things we wrapped up. The ultimate stair makeover! You can see how it all went down at that link.

I do however want to review it a bit for you to see. My husband and I recently tore the carpet from our stairs and painted the wood underneath creating a fresh, clean, and modern look! We did this project over a full weekend and two additional weeks nights following.

The carpet was old and dirty giving the entry a very dark and dated feel. Our main goal was to rip off the carpet , see what wood was underneath, and. This is our stairs before.

To me, the most important little tool is the tack cloth because even after vacuuming and cleaning the stairs I still got a huge amount of lint on the cloth. Pull up all the carpet pad…. To take up all the carpet tack strips , just place a flat head screw driver under the strip—tap in with the hammer and gently pry it up.

Keep moving the screwdriver until the tack strip comes up. Do this same technique with all the 569million staples…. Custom Sizes, Shapes, Quantities Available! Buy custom sizes, shapes, and quantities.

Affordable American made quality. View Great Selection of Sturdy Rubber Stair Mats Made From Reclaimed Rubber. Here there are, you can see one of our how to remodel stairs from carpet to wood gallery, there are many picture that you can browse, do not miss them. When you have an all-white kitchen and a white islan consider changing the island with a wooden cabinet island or simply paint the island a contrasting shade.

An up close view of the new stair treads, waiting to be fitted and installed. The VERY talented stair guy started on the bottom and worked his way up. He used MDF for each riser and then solid red oak for each tread.

He basically cut off any overhang of our old treads (they were MDF and were covered in carpet ). Starting near the top of the stairs , use pliers to pull up the carpet from a corner, freeing it from the tack strip or staples that hold it in place. Stacy of The Serene Swede. Try not to drip and don’t glob it on–you’ll likely need more than one coat. We did four coats in order to even out the wood color from underneath the carpet runner (it was lighter) and blend in the 1. Explore our Preparation Products Now. Get Inspired with Project Ideas to Beautify the Wood Throughout your Home.

Free 2-day Shipping On Millions of Items.