Installing curtain rods

How can I hang curtain rods on window? How to attach a curtain rod to drywall? How do you Mount curtain rods? Measure for the height of the rod. Use a measuring tape.

Determine where the top of the curtain will be from where. Mark where the brackets will go. You’ll want to buy a rod that’s a little bit longer than this measurement. Add a mid brace if needed. You’ll need to get the curtain on the rod before you.

Curtain rod placement depends largely on the length of the curtains. You want the curtains to. Unlock the curtain rod ends and get. Another often used. It’s also common to install the curtain rod half way between the ceiling and the top of the window frame.

Install and use a drywall anchor - Duration: 4:12. Broadcast Sunny 391views. Press the finials into each end of the rod , or screw them in place, depending on their construction.

Once the curtains are hanging from the rods in the desired spot, test the curtains. Make sure you can move the curtains as they’re designed to move. Raise the Curtain Rod right below the ceiling line and you will add height and style to. To install the curtain brackets and hang the rod , follow these steps. When you're sure of all your measurements, use a pencil to mark where the screws.

For particularly heavy curtains or rods , you might want to install wall anchors to mount the brackets securely to the wall. Place curtains on the rod. Plug-in or battery option, remote or wifi control.

Push the rod through your curtain if the curtain has eye-holes. Pro-grade for drapes up to 110lbs. How far from the window should the curtain rod brackets be? It depends on your curtains and how big you want the window to look. Familiarize yourself with the bracket.

Read the installation instructions and note the names of the. You can use grommet rings or fabric tabs. If the curtain rod brackets are firm enough, then your job is done. The first step in the process to install curtain rod brackets is to locate the studs that have been used to frame either the window or the door that needs to be covered with the curtain. This can be done via an electronic stud finder.

Then, you should rest the rod onto the brackets that you have mounted on the wall. Brackets should be installed approximately inches outside. Their design gives the impression of a hook and a separate rod , when in fact, it’s all one piece.

Double-check the placement by temporarily hanging the rod on the brackets and checking the rod with a level. Attach the brackets to their predetermined position by installing the hardware that was included in the bracket. Need a quick home makeover?

I like the Maytex option above ($19) in the dark oil-rubbed bronze finish, but metallic options are also available. Try Drive Up, Pick Up, or Same Day Delivery.