How to hide cable cords

What is the best way to hide cords? How do I Hide my TV cables? How to hide TV wires on a wall? Use cable ties: Use cable ties to bundle cords and snip off the ends as needed. Conceal with flex tubing: Measure the length of the cords you want to conceal, then measure and cut flex tubing to.

Under the carpet if you have one. Otherwise, if your cable matches your wall cover it can be pinned to the ceiling and go up and around instead of down. If you put the electroncis in a cupboard you can still control them with what is called an IR Extender. This can be as simple as a small IR sensor (IR Flasher) on a wire that plugs into some components to allow remote sensing of the signal. This is not a good permanent solution btw, since the.

Place a decorative box on a shelf just under the cables. Gather the cables together and close the box to hide them. You can also cut a small hole in either side of the box and feed the cables through this hole to the wall outlet to conceal them. Just wrap the cords together with zip ties, then corral them in an off-white piece of cloth (or a color that matches your walls) and voila — it blends in perfectly!

The sleek box sits on your desk, or pretty much anywhere, and hides your unsightly cords. DIY box cord storage You probably have a cute decorative box hanging around. And now you have a cute box. Group your cords together with cable ties.

Wrap them in groups that are small enough to fit inside flex tubing. Cut the flex tubing to the length of the wrapped cords. Here are three steps to hide them away for a clutter. The steps are virtually the same down below, behind the dresser.

Use the screws that come with the kit to secure the outlet to the wall behind the TV. Use binder clips to keep cords out of sight. Place a power strip in your nightstand to hide your chargers. Feed cords from your wall-mounted TV through the wall.

A rain gutter can be attached to the bottom of a table or desk, towards the back, and attached to the underside of the desk with hangers, end caps, joiner nuts or. See more ideas about Home diy, Hide cords , Home organization. To make them more appealing, you can decorate them with washi tape. Here’s another way in which a box can help you hide the cables. Punch out holes lengthwise on one side of the box and you’ll be able to let the cords go through them and remain organized.

From there, take your favorite Sharpie and write on the tag what the cable goes to. Again, this step is optional, but it could save you some headache in the future. Shop 3M Network Cable Accessories From the People Who Get IT. This involves purchasing a cable management kit ($5 homedepot.com) and running the cords behind—not down—the wall.

The lamp in the den is controlled with a foot switch, so it sticks out while the rest gets routed under the rug to the plug. We went in search of the best ways to hide electrical cords in your décor, and we found some pretty ingenious solutions. From the simple (foam core!) to the elaborate (get a load of that 3-D braided “sculpture”), we’re ready to conceal those cords —sans plasticky faux-wood cord covers and miles of twist ties. If you want to hide power strips, surge protectors and electrical cords on the floor, you can use the combination of a cable raceway and a standard cardboard box and cut holes in it for the cords. If you need a more stylish solution, you may want to go for this cable management box.

Stereos, lamps, computers, alarms clocks—they all have cords. Office areas and bedside tables are two places where electronics (and their pesky cords ) tend to pile up. Thankfully, there are lots of clever ways to end the clutter and hide these eyesores.

Baskets are a great solution when dealing with an abundance of wiring. The back of the cabinets hide the cords that plug into the flat-screen. If you have a smaller house, check out the best IKEA storage hacks for small bedrooms.

Either way, the goal here is to consolidate all of the excess cable that’s hanging down and hide it the best you can. But there are many solutions for it. For example, take a cardboard box, cut out two canals on the sides and hide the cables inside.

It’s better than have them all tangled up under the desk.