How to finish stairs

How can I redo stairs? What is the best finish for stairs? By the time we got done with pre-staining all of our stair treads, we just moved on to staining.

By we, of course, I mean the Ram - although my midwife has approved me doing some staining in a well-ventilated area, I have been taking a break from finishing throughout this pregnancy. If you like the look of basement, you don’t have to cover up your stairs at all. Instea try painting or staining or stain your existing stairs to give them a like-new appearance. First, though, it’s important to sand the stairs down and get them very clean.

I take it you mean the Uprights which hold the Handrail? Just take some painters tape and tape off the other stairs and the sides of the stairs, then take a palm sander with a grit sand paper and sand the stair down to the bare wood. Then apply 2-coats of the. This will remove the dent. Sand all parts of the stairs , including nosings, treads, and edges to ensure the surface is smooth.

Sanding usually requires two to three steps, beginning with 120-grit sandpaper. We applied coats of Minwax Fast-Drying Polyurethane Superior Durability, Clear Semi-Gloss (affiliate link)to our stair treads using a Foam Brush. Be sure to let the poly dry completely in-between coats. Ideally you want to have the stairs match one of the flooring options.

A very handsome option is to stain the treads a dark stain (show the wood grain) and then paint the riser a crisp white. The look of two tones is classic and extremely handsome. But it depends on your lighting. Use a power sander and a medium-grade disc to sand the treads.

Attach a medium-grade sanding disc to a power sander,. Turn off the sander and switch to a fine-grade disc. Go over the treads. To prepare for the stairs to be finished , cut back the lip on the existing treads and thoroughly clean the stairs with a vacuum. Next use a tape measure (Image 1) and mark where cuts need to be made on each tread and riser, cutting at the marks with a miter saw (Image 2).

To get an exact edge, use a grinder (Image 3). Free 2-day Shipping On Millions of Items. It is important that all parts be lightly sanded before finishing.

Any excess glue or oil from a human hand can mar the evenness of your stair finish. Make sure all dust is removed to ensure a smooth finish. Apply stain to a scrap piece of wood as a test piece. Synopsis: Building stairs can be a tough job, but when you’re dealing with framing flaws, the work can be even tougher. In this article, veteran finish carpenter Tucker Windover describes his process for finishing stairs under any circumstances.

Windover says that the skirtboards are the key to a good stair. There are many other options when refining stairs. You can use carpets, take advantage of carpet rolls, vinyl siding, or use stains or paint to give it a new look. The advantages and disadvantages of each method are listed below: Carpet application Advantages: carpets are a granular method to improve stairs. To me, the most important little tool is the tack cloth because even after vacuuming and cleaning the stairs I still got a huge amount of lint on the cloth.

Using a paint scraper, scrape across the step with the grain of the wood. The old polyurethane comes up with the stripper goo. It’s easier to build stairs in the shop. Most finish stairs that I’ve built have an open, mitered stringer on the outside and a housed stringer, where the risers and treads are glued and wedged into mortises, on the wall side. I usually built them in my shop because my tools were all at hand.

Shop-built stairs call for careful measurements. Stain it to match tread and tack it on flush with the top of the tread with glue and a brad nail gun. Fill nail holes with colored putty. Give All Your Projects The Perfect Finish With Varathane Classic Wood Stain.

TimberTech End Coating is formulated specifically for coating the ends of all TimberTech decking products and withstanding even the harshest.