What size nail should you use to install shingles? Is it best to nail or staple your shingles? What kind of nails should I use for cedar siding? What is the best nail for cedar shakes? The ideal nail types for cedar shingle roofing projects include corrosion-resistant.
The size of the nail to use depends on the roofing thickness. Most home improvement specialists feel like these nails are less likely to splinter the shingles. Obviously, the more nails that are splintere the more shingles you have to buy.
Your contractor will be aware of the type of nails needed to complete this job correctly. Nails should be long. Our cedar shingle nails are slender and still to resist wood splitting. Type 3Stainless Steel should be used in corrosive environments or when a pressure treatment or a fire retardant treatment has been applied to the wood. SS, as gun nails do not have a good enough galvanize to stand the conditions.
Staple cedar shingle siding ? They are an accepted fastener by shingle manufacturers such as SBC and Maibec. When properly installe a staple grabs and holds more material than the small-head nail could ever hope to. The installation manual for the CSSB says that staples for attaching sidewall shingles must be stainless steel.
Looking for an air nailer for hanging Eastern (Atlantic) White Cedar Shingles. Standard common nails are too big. Homeside Select Cedar Shake Siding Is Low-maintenance, Hassle-free And Bug-free.
A Stunning Alternative To Natural Painted Cedar With Very Little Maintenance. Ideal nails to use on cedar wood are made from aluminum, double-dipped galvanize or stainless steel. Hot-Dipped galvanize aluminum and stainless steel nails are all corrosion-resistant and all can be used to nail Western Red Cedar. They can rust and disintegrate and react adversely with the natural preservative oils present in cedar resulting in stains and streaks. Other types of nails are not recommended.
Copper nails also react with cedar and should not be used. Each Certi-label shake or shingle shall be applied with two fasteners. Shingle manufacturers recommend using four nails per shingle in the main part of the roof and five nails per shingle in the first row. This amounts to an average of 3nails per square, or 100. The bar of a staple should not cut into the grain, it should almost lay on top of the woo just enough pressure to hold it tight.
Attach the shingles with 1¼-inch roofing nails. Use two nails per shingle. When you come to the last space in a row, use a utility knife to cut a shingle to fit into it.
Drive nails flush with the surface. For maximum life, fixing should be made with no. As a guide approximately 1kg of nails are required to fix bundles of shingles.
In general, though, the thickness of the siding determines the length of the nail. They have annular rings to prevent pullout in high-wind areas.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.