Glulam beam sizes

Glulam is available in both custom and stock sizes. Stock beams are manufactured in commonly used dimensions and cut to length when the beam is ordered from a distributor or dealer. What does glulam stand for?

AITC Beam Capacity Tables. Table specifications are provided with each table indicating conditions and assumptions used to calculate the loads. A wide array of appearance options and layups make this one of the most versatile engineered wood products available.

Stock beams, manufactured in common dimensions, are cut to length when the beam is ordered from a distributor or dealer. Glulam Beams are 2xor 2xDouglas Fir dimensional lumber layered and laminated together with durable, moisture-resistant structural adhesives. By laminating a number of smaller pieces of timber, a single large, strong, structural member is manufactured from smaller pieces.

It can also be shaped to create pitched tapered beams and a variety of load bearing arch and trusses configurations. Available sizes of. ENGINEERED WOOD PRODUCTS (EWP) LVL SPAN AND SIZE CHARTS. Balanced and Unbalanced Beams Rosboro glulam is manufactured in balanced or unbalanced configurations.

The most critical zone for controlling strength of a glulam bending member is the outermost tension zone. Glulam Sizes and Specs A wide range of dimensions are available in lengths of 13. Treated Glulam Beams. It leaves a light honey color finish that is virtually undetectable to the naked eye. It is intended for above ground exterior applications and is most common for raised deck beams.

Beam Automatically calculate sizes suitable for supporting the loads below Note: Glulam beam specifications vary widely from supplier to supplier. Standard Glulam beams. All Rights Reserved. Our Glulam uses WBP melamine glue The melamine glue provides a light glue joint that darkens slightly in the course of time. Glulam Strength As standard glulam from us is produced to strength class GL 28.

A good proportion of our stock sizes are GL 32. Make sure the shear value (Fv) for the species and grade you use exceeds the Fv listed in the span table. Fv does not change when you double the thickness. Beams of more than one ply must be fastened together with either nails or bolts. Typical sizes of glue-laminated timber Sponsored Links Glued laminated timber is a structural engineered wood product made of layers of dimensioned lumber bonded together with adhesives.

Great for decks providing an unobstructed view. Other uses include golf, ATV, and snowmobile bridges, crane mats, and boardwalks. With two Glulam Manufacturing Operations in the U. These beams are 24F-1. South (El Dorado, Arkansas and Washington, Georgia). Our glulam operations are 1 vertically integrated for supply of raw materials with all fiber sourced internally from Canfor’s sawmills located throughout the Southeast United States.

One of the greatest advantages of Structurlam’s Glulam PLUS is that it can be manufactured in a wide range of shapes, sizes , and configurations for application in a variety of. First, defective laminations can be rejected as the laminations are selected. Glulam beams are generally much stronger than solid sawn beams of the same size for a couple of reasons. It is considerably easier and less expensive to reject a portion of a beam than the entire beam.

A sturdy timber frame, filled in with mud brick, brick, straw bale or aerated concrete, withstands centuries in the harshest climate. We also offer a wide range of glulam beam choices from the best manufacturers in the business, including custom sizes. Are there other considerations (like installation ease) to keep in mind when considering the LVL vs.

For a beam that long, I can imagine either will be a handfull for the framers to install.