Tung oil over stain

Is tung oil finish waterproof? How long should a tung oil finish last? How to use a tung oil finish? Then you will want to use a tung oil-based topcoat applied over an oil-based stain when you are staining or refinishing your special piece of furniture.

However, it does require some upkeep. Then make a sample from a chunk of poplar, put some holes in it, fill them with the putty and test some stains on the sample to see how the putty accepts the stain. Stains have a varnish binder in them to keep the pigment in place, this seals the wood preventing an oil to penetrate into the wood. Garnet shellac would be my choice. A pure or polymerized tung oil finish is easy to use and will produce beautiful on any type of woo inside or out.

Other types of existing finishes, such as varnish, must be remove as tung oil is a penetrating oil. Brown paste shoe polish is a common stain for me particularly when no other stain is on hand. You will like the tung oil. Let the tung oil dry, with the dampness of the season you will have to be patient.

Sand wood to obtain a smooth, uniform surface. Remove all dust with a cloth dampened with mineral spirits. Be sure the stain has completely dried before applying the finish. Also, polymerized tung oil will create a hardened film finish if enough coats are applied.

I mention this because the current finish may prevent further absorption of anything, including a stain. Varathane Offers A Wide Array Of Colors From Traditional To Contemporary. Oils sink deep into the woo and although they harden in the grain, they never prevent the addition of more oil. Minwax stain would be considered a penetrating oil for your purposes.

This is a reference to the formulation and the lack of any type of material such as polyurethane which would block penetration of the tung oil. Polyurethane offers superior waterproofing and is best for high traffic areas. Instead of the TransTint dyes, you can use oil -base dyes (available at woodfinishsupply.com), oil -base stains (Minwax and Benjamin Moore are good choices since they contain a high percenrage of dye vs. pigments), or you can add oil -base pigments like Japan colors in oil (same source as the oil -base dyes). The only difference with dark tung oil is that we’ve added a non-carcinogenic and PCB-free resinous hydrocarbon that gives the oil a darker and richer finish.

Just as you can over any Drying Oil. The key to success is to make sure the oil has fully dried first. This should make sense, because once drie the oil has cured to a hard solid film surface, and stuff will now stick to it. The other general class of oils are Non Drying Oils.

Danish oil : Smooth and easy. It penetrates into the woo unlike a film finish, which sits on the surface. The oil helps bring out wood’s beauty, while the varnish resin offers somewhat more protection against chemicals, heat, scratches and stains than either oil or wax.

Join the NºB2B online marketplace for chemicals in Europe and start ordering now! Free 2-day Shipping On Millions of Items. The best approach, when in doubt is to stain a scrap of the same wood and apply your finish. Do not sand between coats of tung oil. This is an application technique for tung oil varnishes, not pure tung oil.

We recommend using a water-based stain to change the color of the wood before tung oil is applied (if the color other than that provided by tung oil is desired). ExoShield wood stain stabilizes the wood and greatly reduces the chances of boards either cracking or warping. I use this process when finishing clocks and lacquer ends up as the top coat or in some cases just a couple more shellac coats. When applied to a raw surface, the oil hardens to protect and add luster to the wood.

After sanding and cleaning the wood surface to remove any previous finish, spread the oil along the grain pattern using a clean, lint-free rag. Unlike mineral oil , it dries with a slight sheen, and it is much more water resistant. If you add another, go over the. Real tung oil doesn’t contain petroleum distillate.

Wiping varnish is also sold as Waterlox, Seal-a-Cell, Val- Oil and Profin. Tung oil is another option. Oil -based polyurethane and wiping varnish are easier to use than water-based finishes, which dry very fast, raise the grain and are difficult to use in combination with stains.