The Bevel pattern - sometimes called Bevel lap or clapboard siding - has a triangular profile with a thick butt and a thin upper edge. BEVEL Lap siding should be installed with the lower thicker bevel butt edge overlapping the thin edge which in an attractive shadow line. Bevel siding , also referred to as clapboard siding , is a very popular wood siding product. It is lumber that has been resawn at an angle resulting in two pieces.
One edge has a thick butt while the other edge is thinner. They are lapped to shed water. Bevel wood siding provides rustic warmth for homes and log cabins. It is produced by resaying lumber at an angle to produce two pieces thicker on one edge than the other. The manufacturing process in pieces with one face saw textured.
The other face is smooth or saw textured depending on the grade and customer preference. Beveled wood or clapboard siding as clear from the name is slanted wood that is thicker at one edge and thinner on the other. Its installation is a bit different as per the installation technique.
Installed the thick butt edge over laps the thin creating an excellent weather barrier so that rainwater is shed from the siding. The minimum recommended board overlap at installation for and widths is inch. This bevel lap siding has a rough face and is graded on this face. The back side is a skip surfaced face and may be smooth or rough with imperfections.
White Pine is a durable wood that is often used outside, but must be primed and painted to hold up to the exterior elements. This siding is not pressure treated. Installing Bevel Siding (Clapboards) Spacing for the siding should be laid out beforehand. What is a cedar shake?
The number of board spaces between the soffit and bottom of the lowest piece of siding at the foundation should be such that the overlap is as per the table. Start with the bottom course using a furring strip to support the lower edge. The bevel siding is minor bundled with ten pieces per bundle making it easier to handle. There is an end cap on the ends of the bundles with installation instructions. With a legacy of excellence and products engineered to endure, TruWood leads the way in beautiful, sustainable, durable trim and siding.
Free 2-day Shipping On Millions of Items. Beveled Lap Siding Beleved lap siding most closely resembles clapboard. If you saw the image above, you would notice that there’s a difference in how the planks were milled and that it creates a very similar, yet slightly different effect.
The difference being that bevel planks are cut in a triangular shape while the clapboards aren’t. Smooth Face, Rough Sawn Face. It is best to store the siding flat and off the ground with a vapor barrier so that moisture is not absorbed through the bottom boards of the stack. When building outdoor projects, you need to pick the right wood to ensure your project will last. It is also quite light compared to other woods, making it easy to transport, cut, and drill.
Cedar bevel siding is installed horizontally. Boral Beveled Siding Stock Profiles. As a result, you have a lot of siding color options. The same goes for the style options.
For example, you can go for the warm traditional feel of layered bevel or you can streamline your home’s look with some super sleek, tongue and groove siding or you can get creative with your own board and batten pattern.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.